Sanmay Building Solutions Private Limited

Birla Aerocon Block Jointing Mortar is a superior water resistant cement based mortar joint especially formulated for joining Birla Aerocon AAC Blocks etc. It contains selected graded dry sand, grey cement and imported & modified polymers that make the joints stronger and smoother. Its Superbond Technology further improves workability, water retention, durability and strong adhesions to surfaces. It is also more resistant to corrosive environment than traditional jointing mortars.
Birla Aerocon Block Jointing Mortar by virtue of its Superbond Technology ensures in laying strong and thin layer of joint. It is not only cost – effective, but also makes the walls even by improving the levelling of the walls and reducing the thickness of the plaster

Application Area:
Laying & Joining of AAC Blocks.Joining of Concrete Windows and Door Frames etc.


Key Features:Stronger Adhesion No Water Percolation???No Curing Required Superbond Technology 
Benefits:High Strength: It’s superbond technology and use of selected graded ingredients makes the adhesion stronger to surface. Reduces Wastage: It has excellent workability compared to conven onal mortar. No water Percola on: due to it’s thinner joints and materials used no pores and formed to let water pass.Faster Construc on: No curing me is required and hence making the construc on faster than conven onal mortar. Economical: It’s ease of applica on saves me and cost. No heat loss: Due to 3mm thin joints and the ingredients used, it doesn’t let heat loss through joints. Superbond Technology: It contains selected graded ingredients and imported & modified polymers for stronger adhesion and smoother finish.  Surface preparation & precaution: Masonry Surface should be clean, without dust and voids. Pre-wet the blocks prior to the application of Birla Aerocon Jointing Mortar. Birla Aerocon Block Jointing Mortar contains only eco–friendly, fillers and additives. However, being sand and cement based it is alkaline and hence it is advisable to avoid direct eye and skin contact with this. In case of eye contact, wash with clean water at least for 15 minutes and seek medical help. Always add Birla Aerocon Block Jointing Mortar to water and not water to Birla Aerocon Block Jointing Mortar during mixing. 
Packaging & Storage:Birla Aerocon Block Jointing Mortar is available in 40 Kg bag and has a shelf life of 6 months subject to proper storage in cool dry place. As temperature, humidity and other parameters vary from site to site. The above information should be treated as a general guideline. Water Demand: Depending upon the substrate and climate approx. 10 to 12 litre of water for 40 Kg bag. For concrete blocks, wet mortar should have less water to form 2 to 3 mm bed of Birla Aerocon Block Jointing Mortar. Coverage: Coverage of Birla Aerocon Block Jointing Mortar is approx. 120 to 140 sq.ft. of block size 600x200x100mm in 40 kg bag. The coverage area however will depend upon the quality and evenness of the substrate, thickness of joints.